FAQ

In international trade, safety compliance is a critical prerequisite for smooth customs clearance. For products involving chemicals, toys, batteries, and similar items, the Material Safety Data Sheet (MSDS) is a key document often required by customs authorities worldwide. To ensure the accuracy and reliability of MSDS, many companies opt for third-party testing agencies to generate MSDS test reports. Today, the editor from Huabiao Testing explains what MSDS testing entails and where it can be conducted.

Importance of MSDS

MSDS testing is not only a globally recognized requirement for chemical safety management but also a cornerstone of corporate compliance. A complete MSDS comprises 16 sections, covering:

• Physical and chemical properties of the substance.

• Toxicological information.

• Ecological data.

• Safe handling and storage guidelines.

• Emergency measures and disposal considerations.

For exporters, MSDS is a mandatory document for market entry into regions like the EU and North America. For instance, in Quanzhou, a hub for chemical, footwear, and electronics industries, many companies rely on MSDS testing to facilitate exports to these markets, ensuring compliance with stringent safety regulations.

What is MSDS Testing?

MSDS testing involves evaluating a product or material to compile accurate data for the Material Safety Data Sheet. This process verifies the composition, hazards, and safe use of substances, ensuring compliance with international standards such as:

• GHS (Globally Harmonized System): For classification and labeling of chemicals.

• REACH (EU Regulation EC No 1907/2006): For chemical substances in the EU.

• OSHA (U.S.): Hazard Communication Standard (29 CFR 1910.1200).

Testing may include:

• Chemical Composition Analysis: Identifying ingredients and their concentrations.

• Physical Property Testing: Boiling point, flash point, density, etc.

• Toxicological Assessment: Health hazards (e.g., carcinogenicity, skin irritation).

• Environmental Impact: Biodegradability, aquatic toxicity.

The resulting MSDS report ensures that the product meets regulatory requirements and provides clear safety information for handlers, transporters, and end-users.

Where Can MSDS Testing Be Conducted?

When selecting a testing service for MSDS, companies should consider the following factors:

1. Accreditation: Ensure the laboratory holds certifications like CNAS (China National Accreditation Service) or CMA (China Metrology Accreditation) for credible results.

2. Compliance with Target Market Standards: The lab should be familiar with regulations specific to the destination market (e.g., EU, U.S., or Canada).

3. Industry Expertise: Experience with specific product categories (e.g., chemicals, batteries, toys) ensures accurate testing.

4. Multilingual Capabilities: Ability to provide MSDS in multiple languages for global markets.

5. Response Time: Capability to meet urgent deadlines for time-sensitive shipments.

Recommended Testing Agency:
Ningbo Huabiao Testing Co., Ltd. is a leading third-party testing agency offering comprehensive MSDS testing services. Key advantages include:

• Accreditation: CMA/CNAS-certified, ensuring internationally recognized test reports.

• Expertise: Extensive experience with chemicals, electronics, toys, and other export products.

• Global Compliance: Familiarity with GHS, REACH, OSHA, and other international standards.

• Multilingual Support: MSDS reports available in English, Chinese, and other languages.

• Efficiency: Fast turnaround times to meet urgent export needs.

Huabiao Testing uses advanced equipment, such as gas chromatography-mass spectrometry (GC/MS) and inductively coupled plasma mass spectrometry (ICP-MS), to deliver accurate data for MSDS compilation.

MSDS Testing Process

1. Consultation: Contact the testing agency (e.g., Huabiao Testing) and provide product details, including composition, intended use, and target market.

2. Sample Submission: Submit representative product samples (e.g., 1–2 units or a small quantity of material).

3. Testing: The laboratory conducts chemical, physical, and toxicological tests based on applicable standards.

4. Report Compilation: The agency generates a 16-section MSDS report, detailing test results and safety information.

5. Review and Delivery: The client reviews the report, and the agency provides the final MSDS in the required format and language.

6. Ongoing Support: Retest or update the MSDS if the product formulation changes or new regulations apply.

Huabiao Testing, with its experienced technical team and state-of-the-art equipment, provides comprehensive MSDS/SD (Safety Data Sheet) certification solutions. Accredited with CMA/CNAS qualifications, our test data is accurate and reliable, and our reports carry international credibility. We help clients manage risks, meet market requirements, and ensure their products succeed globally.

Safety testing ensures that products are safe for consumer use, protecting users from harm and enhancing product reliability while meeting stringent global quality requirements. Today, the editor from Huabiao Testing explains the concept of safety testing and outlines the key safety testing standards.

Definition of Safety Testing

Safety Testing involves a series of standardized experiments and inspections to verify that a product complies with safety regulations and standards during design, manufacturing, and use. The goal is to ensure the product does not pose risks to users, the environment, or property under normal operation, abnormal conditions, or failure scenarios. Potential hazards include electric shock, fire, mechanical injury, or chemical contamination. Safety testing is a core component of product safety certifications such as CE, UL, FCC, and CCC, and it applies to diverse industries, including electronics, appliances, machinery, construction, automotive, and toys.

Major Safety Testing Standard Systems

Different countries, regions, and industries have their own safety standards. Below are the primary global standard systems and representative standards:

1. International Standards

• IEC (International Electrotechnical Commission) Standards:
  Cover foundational safety requirements for electrical and electronic products. Examples include:

• IEC 60664-1: Insulation coordination for low-voltage systems (e.g., electrical clearances, creepage distances).

• IEC 60950-1: Safety of information technology equipment (replaced by IEC 62368-1).

• IEC 62368-1: Safety requirements for audio/video, information, and communication technology equipment (replaces IEC 60065 and IEC 60950-1).

• IEC 60335 Series: Safety standards for household and similar electrical appliances (e.g., IEC 60335-1 for general requirements, plus specific standards for individual products).

• ISO (International Organization for Standardization) Standards:
  Focus on mechanical safety, material safety, and general safety principles. Examples include:

• ISO 12100: Safety of machinery – General principles for design (risk assessment and risk reduction).

• ISO 14971: Risk management for medical devices.

2. Chinese National Standards (GB)

• GB 4706 Series: Safety standards for household and similar electrical appliances (aligned with IEC 60335). Examples:

• GB 4706.1: General requirements.

• GB 4706.2: Specific requirements for electric irons.

• GB 4706.19: Specific requirements for washing machines.

• GB 7000 Series: Safety requirements for luminaires (e.g., GB 7000.1: General requirements and tests).

• GB 8898: Safety requirements for audio and video equipment (aligned with IEC 60065).

• GB/T 16895 Series: Low-voltage electrical installation design standards (aligned with IEC 60364).

3. U.S. Standards

• UL (Underwriters Laboratories) Standards:
  Widely used in the U.S., developed by UL. Examples include:

• UL 60335 Series: Safety standards for household appliances (aligned with IEC 60335, with stricter requirements in some cases).

• UL 94: Flammability testing for plastic materials (e.g., V-0, V-1, HB ratings).

• UL 1310: Safety for Class 2 power supplies.

• UL 62368-1: Safety for audio/video and IT equipment (aligned with IEC 62368-1).

• ASTM Standards:
  Focus on consumer products, materials, and machinery. Example:

• ASTM F963: Toy safety standard (covering physical, mechanical, flammability, and chemical toxicity).

4. European Standards (EN)

• EN Standards:
  Harmonized EU standards, often based on IEC standards. Examples include:

• EN 60335 Series: Safety for household appliances (aligned with IEC 60335).

• EN 62368-1: Safety for audio/video and IT equipment (aligned with IEC 62368-1).

• EN 55014 Series: Electromagnetic compatibility (EMC) standards (e.g., EN 55014-1 for emission, EN 55014-2 for immunity).

• Machinery Directive (MD) Standards:

• EN ISO 12100: Safety of machinery – Design principles.

• EN 349: Safety of machinery – Minimum gaps to avoid crushing.

5. Other Regional Standards

• Japan:

• JIS Standards: E.g., JIS C 60335 (appliance safety, aligned with IEC 60335).

• PSE Certification: Mandatory for electrical products, divided into “Specified Electrical Appliances” (e.g., plugs, transformers, requiring third-party certification) and “Non-Specified Electrical Appliances” (self-declaration).

• Australia/New Zealand:

• AS/NZS Standards: E.g., AS/NZS 60335 (appliance safety, aligned with IEC 60335), AS/NZS 3100 (electrical installation standards).

• Canada:

• CSA Standards: E.g., CSA C22.2 No. 60335 (appliance safety, aligned with IEC 60335), CSA C22.1 (Canadian Electrical Code).

Key Considerations for Safety Testing

• Product-Specific Standards: Each product type (e.g., toys, appliances, IT equipment) has unique requirements, often combining general standards (e.g., IEC 60335-1) with specific ones (e.g., IEC 60335-2-7 for washing machines).

• Market Requirements: Compliance with the target market’s standards (e.g., UL for the U.S., EN for the EU) is essential for market access.

• Testing Scope: Includes electrical safety (e.g., insulation, grounding), mechanical safety (e.g., stability, sharp edges), thermal safety (e.g., overheating), and chemical safety (e.g., restricted substances).

• Certification Process: Involves sample testing, documentation review, and issuance of test reports or certificates by accredited laboratories.

Huabiao Testing, with its experienced technical team and advanced testing equipment, offers comprehensive safety testing solutions. Accredited with CMA/CNAS qualifications, our test data is accurate and reliable, and our test reports carry international credibility. We help clients manage risks, meet market requirements, and ensure their products succeed globally.

With the expanding children’s toy market, consumer attention to toy safety has grown significantly. Countries and regions have established stringent safety standards to ensure toys do not harm children. Standards such as ASTM F963-23, CPSIA (Consumer Product Safety Improvement Act), and CPC (Children’s Product Certificate) are critical compliance benchmarks for toy production and sales. Today, the editor from Huabiao Testing addresses whether children’s golf toys require CPC certification and outlines the process for obtaining it.

Do Children’s Golf Toys Require CPC Certification?

Yes, children’s golf toys designed or intended primarily for children aged 12 and under require CPC certification. According to the U.S. Consumer Product Safety Improvement Act (CPSIA, 15 U.S.C. § 1278a) and related regulations (16 CFR Part 1110), these toys must be tested by a CPSC-accredited third-party laboratory to ensure compliance with safety standards, followed by the issuance of a CPC by the manufacturer or importer.

Children’s golf toys, which typically include plastic or wooden golf clubs, balls, and bags, pose several potential safety risks:

• Physical Risks: Sharp club tips, small balls, or detachable components may cause pinching, choking, or other injuries.

• Chemical Risks: Plastic parts or coatings may contain hazardous substances like lead or phthalates (6P), which can harm children’s health.

• Flammability Risks: Textile components, such as golf bags, require flammability testing to prevent fire hazards.

How to Obtain CPC Certification?

CPC certification involves testing by a CPSC-accredited laboratory and the preparation of a CPC certificate by the manufacturer or importer. Below is the detailed process for obtaining CPC certification for children’s golf toys:

1. Determine Testing Requirements
   Identify applicable safety standards based on the target market and product characteristics:

• GB 6675: Chinese toy safety standards for reference.

• EN71: Toy safety standards for mechanical, chemical, and flammability safety.

• SVHC Testing: Compliance with REACH for high-concern substances.

• CPSIA: Covers lead, phthalates, and other chemical restrictions.

• 16 CFR Part 1110: Mandates third-party testing and CPC issuance.

• ASTM F963: Toy safety standard for physical, mechanical, and chemical properties.

• United States:

• European Union (if applicable, as referenced in your prior SVHC question):

• China (if applicable):

• Product Characteristics: Confirm the toy’s materials (e.g., plastic, wood, metal), target age group (e.g., 3–6 or 6–12 years), and usage (indoor or outdoor).

2. Identify High-Risk Substances

• List the components of golf clubs, balls, and bags, focusing on materials like coatings, plastics, or textiles.

• Pay special attention to lead (<100 ppm in substrates, <90 ppm in coatings), phthalates (6P, <1000 ppm), and SVHCs (if targeting the EU).

3. Select a CPSC-Accredited Laboratory
   Choose a laboratory accredited by the CPSC and certified to ISO/IEC 17025, such as Ningbo Huabiao Testing Co., Ltd., which offers:

• Expertise in CPSIA and ASTM F963 testing.

• Advanced equipment like XRF (X-ray Fluorescence Spectrometer) and GC/MS (Gas Chromatography-Mass Spectrometry).

• CPSC-recognized and CMA/CNAS-accredited status for credible results.

4. Prepare Application Materials
   Gather the following documentation and samples:

• Specification sheet (materials, dimensions, weight).

• Design drawings or schematics.

• Production process description.

• Labeling and packaging samples (including age grading, e.g., “3+”).

• Company Information: Business license or registration certificate.

• Product Information:

• Existing Test Reports (if available): Previous lead or 6P test results to streamline the process.

• Samples: Provide 3–5 samples covering all colors, styles, or material variations (e.g., different coatings may contain distinct chemicals).

5. Submit Application and Conduct Testing

• Physical and Mechanical Safety: Small parts, sharp edges, or pinch points per ASTM F963 and 16 CFR 1500.48/49.

• Chemical Safety: Lead, phthalates, and other substances (e.g., formaldehyde for textiles).

• Flammability: Compliance with 16 CFR 1610 (textiles) or 16 CFR 1611 (vinyl films) for components like golf bags.

• Complete the CPC certification application form, providing company and product details.

• Send samples to the laboratory and pay testing fees.

• The laboratory tests for:

• Testing typically takes 3–7 working days, depending on the product’s complexity.

6. Obtain Test Report

• Test results (e.g., lead <100 ppm, phthalates <1000 ppm).

• Product photos and descriptions.

• Referenced standards (e.g., CPSIA, ASTM F963).

• Laboratory accreditation details.

• The laboratory issues a test report detailing:

• If non-compliant, adjust materials (e.g., switch to lead-free coatings) or design (e.g., enlarge small parts) and retest.

• The report is used to compile the CPC certificate and meet platform requirements (e.g., Temu, Amazon).

7. Issue CPC Certificate
   The manufacturer or importer prepares the CPC certificate, including:

• Product Description: Name, model, or SKU (e.g., “Children’s Golf Toy Set, Model ABC”).

• Applicable Standards: List all relevant standards (e.g., CPSIA, ASTM F963, 16 CFR 1303).

• Manufacturer/Importer Details: Name, address, and contact information.

• Testing Details: Test date, report number, and CPSC-accredited laboratory information.

• Production Details: Date and place of manufacture.

• Tracking Label Information: Batch number for traceability.

• U.S. Authorized Representative (USAR): Mandatory for Temu as of December 19, 2024.

• The CPC must be provided to distributors, retailers, or platforms and retained for at least 5 years.

8. Market Access and Compliance

• Submit the CPC certificate and test report to U.S. customs, retailers, or e-commerce platforms like Temu or Amazon.

• For Temu, upload the CPC to the Seller Central compliance center, ensuring USAR details are included.

• Retest products annually or with new production batches and monitor CPSC updates to maintain compliance.

Recommended Testing Agency

Ningbo Huabiao Testing Co., Ltd. is a trusted third-party testing agency with extensive experience in CPC certification for children’s toys, including golf sets. Key advantages include:

• Accreditation: CMA/CNAS qualifications and CPSC-recognized laboratory status.

• Expertise: Comprehensive knowledge of CPSIA, ASTM F963, and related U.S. safety standards.

• Comprehensive Services: Support from sample testing to CPC preparation and compliance guidance.

• Global Credibility: Test reports recognized internationally, ensuring compliance with U.S. market requirements.

Huabiao Testing, with its experienced technical team and advanced testing equipment, offers comprehensive CPC certification solutions for children’s golf toys. Accredited with CMA/CNAS qualifications, our test data is accurate and reliable, and our test reports carry international credibility. We help clients manage risks, meet market requirements, and ensure their products succeed globally.

With the continuous growth of the children’s toy market, consumer focus on toy safety has intensified. Countries and regions have established stringent safety standards to ensure toys do not harm children. Standards such as ASTM F963-23, CPSIA (Consumer Product Safety Improvement Act), and CPC (Children’s Product Certificate) are critical compliance benchmarks for toy production and sales. Today, the editor from Huabiao Testing explains what a CPSIA report is and outlines the process for obtaining one.

What is a CPSIA Report?

A CPSIA report is a detailed test report issued by a CPSC-accredited laboratory to demonstrate that a children’s product complies with the safety requirements of the Consumer Product Safety Improvement Act (CPSIA). The CPSIA, enacted in 2008, imposes strict safety standards for products intended for children aged 12 and under, such as toys, clothing, bedding, and other children’s items. The report verifies compliance with specific safety tests, including:

• Lead Content: Total lead in accessible components must not exceed 100 ppm (substrates) or 90 ppm (surface coatings).

• Phthalates: Limits on six specified phthalates (e.g., DEHP, DBP, BBP) to 0.1% (1000 ppm) each.

• Flammability: Compliance with standards like 16 CFR 1610 (textiles) or 16 CFR 1611 (vinyl films).

• Heavy Metals: Testing for substances like cadmium or mercury, if applicable.

• Physical and Mechanical Safety: Ensuring no small parts, sharp edges, or other hazards (per ASTM F963 for toys).

• Other Requirements: Depending on the product, additional tests (e.g., FDA 21 CFR for food contact materials or LHAMA for art materials) may apply.

The CPSIA report is a prerequisite for issuing a Children’s Product Certificate (CPC), which is required for market entry in the United States, including sales on platforms like Amazon and Temu.

Process for Obtaining a CPSIA Report

1. Determine CPSIA Applicability:
   Identify whether the product falls within the scope of CPSIA, which applies to all products designed or intended primarily for children aged 12 and under. Different product types (e.g., toys, apparel, scissors) have specific testing requirements under standards like ASTM F963, 16 CFR 1303 (lead in coatings), or 16 CFR 1307 (phthalates). Use the CPSC’s Regulatory Robot tool or consult a testing agency to confirm applicable standards.

2. Prepare Product Samples:
   Gather representative samples of the product, ensuring they reflect all models, colors, or variations intended for the market. For example, if a toy has multiple color variants, test samples should cover all materials used.

3. Select a CPSC-Accredited Laboratory:
   Choose a third-party laboratory accredited by the CPSC, such as Ningbo Huabiao Testing Co., Ltd., which is also CMA/CNAS-accredited. Verify the lab’s accreditation for specific CPSIA tests on the CPSC website.

4. Submit Samples for Testing:
   Send the prepared samples to the laboratory, along with technical documentation, including:

• Product specifications (e.g., name, model, material composition).

• Bill of Materials (BOM).

• Intended use and age group. The laboratory conducts tests based on CPSIA requirements, such as:

• Chemical Testing: Lead, phthalates, and other substances using XRF (X-ray Fluorescence Spectrometer) or GC/MS (Gas Chromatography-Mass Spectrometry).

• Physical Testing: Small parts, sharp edges, or pinch points (per 16 CFR 1500.48/49 or ASTM F963).

• Flammability Testing: Compliance with 16 CFR 1610/1611. Testing typically takes 5–15 working days, depending on product complexity.

5. Receive and Review the Test Report:
   The laboratory issues a detailed CPSIA test report indicating whether the product complies with all applicable standards. The report includes:

• Test methods and standards applied.

• Results for each tested parameter (e.g., lead <100 ppm).

• Laboratory details and accreditation. If the product fails, adjust materials (e.g., switch to lead-free coatings) or design (e.g., remove small parts) and retest.

6. Prepare the Children’s Product Certificate (CPC):
   Upon receiving a compliant CPSIA test report, the manufacturer or importer drafts the CPC, which includes:

• Product Description: Name, model, or SKU (e.g., “Children’s Plush Toy, Model XYZ”).

• Applicable Standards: List all relevant CPSC standards (e.g., CPSIA, ASTM F963, 16 CFR 1303).

• Manufacturer/Importer Details: Name, address, and contact information.

• Testing Details: Date, location, and CPSC-accredited laboratory information.

• Production Details: Date and place of manufacture.

• Tracking Label Information: Batch number for traceability.

• U.S. Authorized Representative (USAR): Required for platforms like Temu (as of December 19, 2024). The CPC must be provided to distributors, retailers, or platforms and retained for at least 5 years.

7. Market Access and Compliance:
   Submit the CPSIA test report and CPC to U.S. customs, retailers, or e-commerce platforms (e.g., Amazon, Temu) to meet market entry requirements. For Temu, upload the CPC to the Seller Central compliance center, ensuring inclusion of USAR details. Regularly retest products (annually or per new batch) and monitor CPSC regulatory updates to maintain compliance.

Recommended Testing Agency

Ningbo Huabiao Testing Co., Ltd. is a trusted third-party testing agency with extensive experience in CPSIA testing and CPC certification. Key advantages include:

• Accreditation: CMA/CNAS qualifications and CPSC-recognized laboratory status.

• Expertise: Comprehensive knowledge of CPSIA, ASTM F963, and related U.S. safety standards.

• Comprehensive Services: Support from sample testing to CPC preparation and compliance guidance.

• Global Credibility: Test reports recognized internationally, ensuring compliance with U.S. market requirements.

Huabiao Testing, with its experienced technical team and advanced testing equipment, offers comprehensive CPSIA certification solutions. Accredited with CMA/CNAS qualifications, our test data is accurate and reliable, and our test reports carry international credibility. We help clients manage risks, meet market requirements, and ensure their products succeed globally.

With the continuous expansion of the children’s toy market, consumer attention to toy safety has grown significantly. Countries and regions have established stringent safety standards to ensure toys do not pose risks to children. Standards such as ASTM F963-23, CPSIA (Consumer Product Safety Improvement Act), and CPC (Children’s Product Certificate) have become critical compliance benchmarks for toy production and sales. Today, the editor from Huabiao Testing addresses whether children’s scissors require CPC certification and provides a comprehensive overview of the scope of CPC certification.

Do Children’s Scissors Require CPC Certification?

Yes, children’s scissors designed or intended primarily for children aged 12 and under must undergo CPC certification. According to the U.S. Consumer Product Safety Improvement Act (CPSIA, 15 U.S.C. § 1278a) and related regulations (16 CFR Part 1110), children’s scissors, as products specifically designed for children, must be tested by a CPSC-accredited third-party laboratory to ensure compliance with safety standards. The manufacturer or importer is then required to issue a Children’s Product Certificate (CPC).

Why Do Children’s Scissors Require CPC Certification?

1. Safety Risks:
   Children’s scissors may have sharp edges, plastic handles, or coatings that could contain hazardous substances such as lead or phthalates (e.g., the six regulated phthalates, or 6P, as referenced in your previous question). These pose risks of physical injury, chemical exposure, or other hazards.

2. Regulatory Requirements:
   The U.S. mandates that all children’s products comply with CPSIA and other CPSC regulations, requiring testing for physical, chemical, and flammability safety, followed by CPC issuance.

3. Market Access:
   E-commerce platforms like Temu and Amazon require sellers to upload CPC certificates to verify compliance, ensuring products meet U.S. market entry requirements.

Scope of CPC Certification

CPC certification applies to all products designed or intended primarily for children aged 12 and under. The following categories outline the scope:

1. Toys:

• Examples: Dolls, models, puzzles, building blocks, plush toys.

• Requirements: Must comply with ASTM F963 (Toy Safety Standard), testing for small parts, sharp edges, and chemical substances (e.g., lead, phthalates).

2. Children’s Clothing and Accessories:

• Examples: Children’s apparel, shoes, hats, gloves, hair clips, necklaces.

• Requirements: Testing for lead (<100 ppm), phthalates (6P, <1000 ppm), and flammability (16 CFR Part 1610 for textiles).

3. Children’s Products:

• Examples: Children’s tableware, water bottles, baby bottles, children’s furniture, cribs, strollers, bicycles, tricycles, children’s scissors.

• Requirements: Testing for physical performance (e.g., stability, no sharp edges), chemical safety (e.g., lead <100 ppm), and, for food contact items, compliance with FDA 21 CFR (e.g., BPA-free materials).

4. Products with Specific Materials:

• Examples: Products with lead-based coatings or phthalates, such as plastic toys or coated scissor handles.

• Requirements: Compliance with 16 CFR Part 1303 (lead in coatings <90 ppm) and 16 CFR Part 1307 (phthalates <1000 ppm).

5. Art Materials:

• Examples: If children’s scissors are used for art activities (e.g., paper cutting), they must comply with LHAMA (16 CFR § 1500.14(b)(8)) and bear the label “Conforms to ASTM D-4236”.

6. Exemptions:

• Certain natural materials (e.g., unpainted wood) may be exempt from lead testing per 16 CFR § 1500.91, but a CPC certificate is still required, noting the exemption.

• Products not intended for children (e.g., adult scissors) do not require CPC certification.

CPC Certification Process for Children’s Scissors

1. Consultation and Preparation:
   Contact a CPSC-accredited third-party laboratory, such as Ningbo Huabiao Testing Co., Ltd., and submit:

• Product specifications (e.g., model, material composition like stainless steel blades or plastic handles).

• Bill of Materials (BOM).

• Samples (typically 2–3 units).

• Target market information (primarily the U.S.).

2. Laboratory Testing:
   Tests are conducted per CPSIA, ASTM F963, and other relevant standards (16 CFR Parts), including:

• Physical and Mechanical Safety: Ensuring no sharp edges, pinch points, or detachable small parts that pose choking hazards (per 16 CFR 1500.48/49).

• Chemical Safety: Testing for lead (<100 ppm in substrates, <90 ppm in coatings), phthalates (<1000 ppm for 6P), and other substances like formaldehyde if textiles are involved.

• Flammability: Compliance with 16 CFR 1610 (textiles) for any fabric components (e.g., handle grips).

• Testing typically takes 5–15 working days, depending on material complexity.

3. Results Review:
   The laboratory issues a test report. If non-compliant, adjust materials (e.g., switch to lead-free coatings or phthalate-free plastics) or design (e.g., blunt tips) and retest.

4. CPC Certificate Issuance:
   The manufacturer or importer prepares the CPC certificate, including:

• Product description (e.g., “Children’s Scissors, 5-inch, plastic handle”).

• Applicable standards (e.g., CPSIA, ASTM F963, 16 CFR 1303).

• Manufacturer/importer details.

• Test dates, report number, and laboratory information.

• Tracking label details (e.g., batch number).

• U.S. Authorized Representative (USAR) information (required for platforms like Temu as of December 19, 2024).

5. Market Access:
   Submit the CPC certificate and test report to platforms like Temu or Amazon, customs, or retailers to meet U.S. market requirements.

6. Ongoing Compliance:
   Retest annually or with new production batches, monitor CPSC updates, and retain records for at least 5 years.

Huabiao Testing, with its experienced technical team and advanced testing equipment, offers comprehensive CPSIA and CPC certification solutions for children’s scissors. Accredited with CMA/CNAS qualifications, our test data is accurate and reliable, and our test reports carry international credibility. We help clients manage risks, meet market requirements, and ensure their products succeed globally.

As the world’s largest market for children’s consumer products, the United States enforces stringent safety regulations for children’s products. According to statistics, in 2023, over 60% of product recalls by the U.S. Consumer Product Safety Commission (CPSC) involved Chinese products, with many cases attributed to missing certifications. Today, the editor from Huabiao Testing addresses whether Pinduoduo Temu requires CPC certification for children’s products.

Does Pinduoduo Temu Require CPC Certification for Children’s Products?

Yes, Pinduoduo Temu requires CPC certification for children’s products.

The Children’s Product Certificate (CPC) is a mandatory certification enforced by the U.S. Consumer Product Safety Commission (CPSC) to ensure the safety of products designed or intended primarily for children aged 12 and under. Holding a CPC certificate indicates that the product has undergone rigorous safety testing and complies with relevant U.S. safety standards, providing assurance to consumers and reducing risks associated with non-compliant products.

To ensure the quality and safety of children’s products, Pinduoduo Temu, as a cross-border e-commerce platform, imposes strict requirements for children’s products, including the mandatory provision of a CPC certificate. Temu has issued a compliance notice stating that sellers must provide CPC certification for products primarily intended for children aged 12 and under. All products must meet the compliance requirements of the destination market (e.g., the U.S.), and Temu continues to strengthen its inspection and enforcement of CPC certification for children’s products.

Failure to provide a valid CPC certificate or submitting incomplete or fraudulent documentation may result in severe consequences, such as product removal, store suspension, or customs detention. Additionally, products must include a tracking label on both the product and its packaging (unless exempted) to comply with CPSC requirements, as non-compliance may lead to shipping or warehousing issues.

CPC Certification Requirements for Temu

CPC certification ensures compliance with the Consumer Product Safety Improvement Act (CPSIA) and other applicable standards, such as ASTM F963 (toy safety standard) and specific CPSC regulations (e.g., 16 CFR Part 1505 for electric toys, 16 CFR Part 1610/1611 for flammability). Key testing requirements include:

• Lead Content: Total lead content in accessible components must not exceed 100 ppm (0.01%).

• Phthalates: Content of specified phthalates (e.g., DEHP, DBP, BBP) must not exceed 0.1% (1000 ppm) individually.

• Physical and Mechanical Safety: Ensures no sharp edges, small parts, or other hazards that could cause choking, suffocation, or injury.

• Flammability: Compliance with 16 CFR 1610 (textiles) or 16 CFR 1611 (vinyl films) to prevent fire hazards.

• Chemical Safety: Testing for harmful substances like formaldehyde (e.g., ISO 14184-1, ISO 17226) for textiles, if applicable.

• Tracking Label: Permanent labels with manufacturer details, batch number, and production date must be affixed to the product and packaging.

For children’s products like bibs, toys, or clothing sold on Temu’s U.S. platform, sellers must upload a CPC certificate to the platform’s compliance center at the time of listing. Since October 2024, Temu only accepts test reports from testing agencies integrated into its cross-border service market. Additionally, as of December 19, 2024, CPC certificates must include details of a U.S. Authorized Representative (USAR) to facilitate communication for compliance and emergency purposes.

How to Handle CPC Certification for Children’s Products on Temu

To obtain a CPC certificate and comply with Temu’s requirements, sellers must follow these steps:

1. Identify Applicable Standards:
   Determine the specific CPSC regulations and standards (e.g., CPSIA, ASTM F963, 16 CFR Parts) applicable to the product based on its type, material, and intended use. Use the CPSC’s Regulatory Robot tool or consult a professional testing agency for guidance.

2. Select a CPSC-Accredited Laboratory:
   Choose a third-party laboratory accredited by the CPSC (e.g., Ningbo Huabiao Testing Co., Ltd.) to conduct testing. The laboratory must be ISO/IEC 17025-certified and listed on the CPSC’s accredited lab directory.

3. Sample Preparation:
   Submit representative samples of the product (typically 2–3 pieces per model), along with technical documentation, including:

• Product specifications (e.g., name, model, material composition).

• Bill of Materials (BOM).

• Production batch details.

4. Laboratory Testing:
   The laboratory conducts tests for:

• Chemical safety (e.g., lead, phthalates, formaldehyde).

• Physical and mechanical properties (e.g., small parts, sharp edges).

• Flammability and electrical safety (if applicable). Testing typically takes 5–15 working days, depending on the product complexity and test scope.

5. Results Review:
   The laboratory provides a test report detailing compliance with all applicable standards. If the product fails, reformulate materials or redesign (e.g., remove hazardous substances or adjust small parts) and retest.

6. Issue CPC Certificate:
   The manufacturer or importer drafts the CPC certificate based on the test report, including:

• Product Information: Name, model, or SKU.

• Applicable Standards: List all relevant CPSC standards (e.g., CPSIA, ASTM F963).

• Manufacturer/Importer Details: Name, address, and contact information.

• Testing Details: Date, location, and CPSC-accredited laboratory information.

• USAR Information: Name, address, and contact details of the U.S. Authorized Representative (mandatory for Temu as of December 19, 2024).

• Production Details: Date and place of manufacture.

• Tracking Label Information: Batch number for traceability.

7. Upload to Temu:
   Upload the CPC certificate and test report to Temu’s Seller Central dashboard or compliance center. Ensure all information, including USAR details, is accurate to avoid product removal or account suspension.

8. Ongoing Compliance:

• Retest products annually or with each new production batch to ensure continued compliance.

• Monitor updates to CPSC regulations and Temu’s policies, as requirements may change.

• Maintain records of CPC certificates and test reports for at least 5 years, as required by the CPSC.

Recommended Testing Agency

Ningbo Huabiao Testing Co., Ltd. is a trusted third-party testing agency with extensive experience in CPC certification for children’s products. Key advantages include:

• Accreditation: CMA/CNAS qualifications and CPSC-recognized laboratory status.

• Expertise: Comprehensive knowledge of CPSIA, ASTM F963, and other U.S. safety standards.

• One-Stop Service: Support from sample testing to CPC certificate issuance and compliance guidance.

• Global Credibility: Test reports recognized internationally, ensuring compliance with Temu and U.S. market requirements.

Huabiao Testing, with its experienced technical team and advanced testing equipment, offers comprehensive CPC certification solutions for children’s products on Temu. Accredited with CMA/CNAS qualifications, our test data is accurate and reliable, and our test reports carry international credibility. We help clients manage risks, meet market requirements, and ensure their products succeed globally.